Rear Camshaft Adjustment (Fig. 15)

A camshaft misaligned with the valve bank may cause the following:

A. No increase in ground speed in No. 2 (transport) traction selection.

B. Mow pedal will not stay depressed (in detent) without foot pressure.

C. Slow lift of the cutting units.

D. Slow or no drive to the cutting units.

If one or more malfunctions occur, loosen the rear camshaft mounting capscrews and relocate the cam- shaft until the condition is corrected.

Retighten the capscrews.

CAUTION

You must readjust the mow-lift switch when the camshaft adjustment is completed. (See Mow-Lift Switch Adjustment in the Adjust- ments section of Chapter 5 - Electrical Sys- tem). The lift and mow pedal height must also be adjusted. (See Lift and Mow Pedal Height Adjustment in this section.)

1

Figure 15

1. Mounting capscrews

Adjustments

Page 4 - 38

Greensmaster® 3100

Page 60
Image 60
Toro 3100 manual Rear Camshaft Adjustment Fig