17.Push spool partially from control end of sleeve, then remove 6 centering springs from spool carefully by hand

18.Push spool back through and out of sleeve. Rotate spool slowly when removing from sleeve.

19.Remove seal from housing.

20.Remove set screw from housing.

21.Screw a #10-24 machine screw into end of check ball seat. Then by pulling on screw, with a pliers, lift seat out of housing.

22.Remove two (2) seals from check valve seat.

23.Tip housing to remove check ball and check ball retainer.

Figure 52

Figure 53

Greensmaster® 3100

Page 4 - 65

Repairs

Page 93
Image 93
Toro 3100 manual Repairs