Setup Flow for USB Printing 33

Setup Flow for USB Printing
This equipment can be used as a printer using a USB cable. When it is connected using a USB
cable, setups at the initial stage are not required. When you have connected this equipment to
your computer and installed printer drivers, USB printing functions are enabled.
USB printing is not supported by Windows NT 4.0.
Setup Flow Description/Reference
Connect this equipment Connect this equipment to your computer using a USB cable.
Reference: Quick Start Guide for Printing Functions (this
manual)
• Chapter 3 “CONNECTING TO A COMPUTER”
P.24 “Connecting to the USB Port”
Install the client software Install the printer driver from the Client Utilities CD-ROM.
Reference: Printing Guide
• Chapter 2 “INSTALLING CLIENT SOFTWARE”
“Installing Client Software for Windows”
“Installing the Client Software for USB Printing”
Configuring the printer drivers Configure the options and department codes.
Reference: Printing Guide
• Chapter 3 “PRINTING”
“Printing from Windows”
“Before Using the Printer Driver”
Windows Me
Windows 2000
Windows XP
Windows Server 2003
Connecting using a USB
cable