3. ON LINE MODE | ENGLISH VERSION |
3.1 Operation Panel
3. ON LINE MODE
3.1 Operation Panel
This chapter describes usage of the keys on the Operation Panel in On Line mode.
When the printer is in On Line mode and connected to a host computer, the normal operation of printing images on labels or tags can be accomplished.
∙The figure below illustrates the operation panel and key functions.
LCD Message Display |
| |
| ON LINE LED (Green) | |
POWER LED | ERROR LED (Red) | |
(Green) | ||
|
[FEED] key 
[RESTART] key
[PAUSE] key
NOTE:
Flashes only when the Ribbon Near End Detection function is selected.
NOTE:
Use the [RESTART] key to resume printing after a pause, or after clearing an error.
The LCD Message Display shows messages in alphanumeric characters and symbols to indicate the printer’s current status. Up to 32 characters can be displayed on two lines.
There are three LED lights on the operation panel.
LED | Illuminates when… | Flashes when… |
POWER | The printer is turned on. | |
ON LINE | The printer is ready to | The printer is |
| print. | communicating with |
|
| your computer. |
ERROR | Any error occurs with | The ribbon is nearly |
| the printer. | over. (See NOTE.) |
There are three keys on the operation panel.
PAUSE | Used to stop printing temporarily. |
RESTART | Used to restart printing. |
FEED | Used to feed the media. |
E3- 1
