Toshiba Digital Business Telephone Solutions manual To enable/disable Night Transfer

Features Night Transfer

Night Transfer

Incoming calls to your group can be routed to different destinations, based on either two- or three-call routing (ringing) patterns which are set in system programming. The Night Transfer LED indicates the active routing pattern:

	Three-Pattern	Two-Pattern
DAY	OFF	OFF
DAY 2	FLASH	N/A
NIGHT	ON	ON

Up to four Night Transfer (Night Transfer) and Tenant Night Transfer (Night Transfer 1~4) buttons can be assigned and controlled independently. Check with the System Administrator for any additional information.

➤ To enable/disable Night Transfer

➤ Press Night Transfer to	The Night Transfer LED is ON if you are programmed for a
toggle Night Transfer	two-ring pattern.
ON/OFF (two-ring pattern)
...or, if your system is	You are in Day2 Mode. The LED indicators for three-ring
programmed for three-ring	patterns are: Night Mode (LED is ON); Day Mode (LED is
patterns, the LED will flash	OFF; and Day2 Mode (LED is flashing).
instead. Press Night Transfer,	The Night Transfer LED is ON.
again (three-ring pattern), to
activate Night Mode.

Strata CT ACD Supervisor November 2001 19