Toshiba e-STUDIO281c, e-STUDIO351c, e-STUDIO451c

e-STUDIO281c/351c/451c ADJUSTMENT June 2005 © TOSHIBA TEC

3 - 18

* The larger the adjustment value is, the wider the blank area at the right side becomes

(approx. 0.04 mm/step).

Fig.3-8

[H] Bottom margin

(1) While pressing [0] and [5] simultaneously, turn the power ON. → (Adjustment Mode)

(2) Open platen cover or RADF.

(3) Press the [FAX] → [START] to make a copy at the mode of A3/LD, 100%, Black, Text/Photo and

lower drawer.

(4) Measure the blank area G at the trailing edge of the copied image.

(5) Check if the blank area G is within the range of 2±0.5 mm.

(6) If not, use the following procedure to change values and repeat the steps 2. to 4. above.

(Adjustment Mode) → (Key in the code [433]) → [START]

→ (Key in value (acceptable values: 0 to 255))

→ [ENTER] or [INTERRUPT] (stored in memory)

→ (“100% A” is displayed.)

* The larger the adjustment value is, the wider the blank area at the trailing edge becomes

(approx. 0.04 mm/step).

Fig.3-9

Feeding direction