June 2005 © TOSHIBA TEC e-STUDIO281c/351c/451c TROUBLESHOOTING
5 - 41
5
[ 4 ] Paper jam in puncher unit[E9F0] Punching jam
MJ-1023/1024
Is there any paper remaining on the transport path in the finisher or equipment?
ÈYES ÆRemove the paper.
NO
Is the connector J605A on the punch controller PC board disconnected?
Is the harness connecting the punch controller PC board and punch home position sensor
(PI63) open circuited?
ÈYES ÆConnect the connector securely. Replace the harness.
NO
Is the punch home position sensor working properly?
|
|
È
NO Æ1) Connect the connector of the punch home position sensor securely.
2) Replace the punch home position sensor.
YES
Replace the punch controller PC board.