Toshiba e-STUDIO281c, e-STUDIO351c, e-STUDIO451c

June 2005 © TOSHIBA TEC e-STUDIO281c/351c/451c FIRMWARE UPDATING

6 - 21

(4) Connect the download jig with the jig connector on the finisher control PC board.

Fig.6-17

(5) Change the setting of the DIP switch on the finisher contorol PC board.

Change the setting of the DIP switch as follows according to the firmware to be updated.

Note: Note:

Record the current settings of the DIP switch before changing them. After the updating is com-

pleted, return the DIP switch to the status as record.

Fig.6-18

Change all the setting of the DIP switch (1-8) to OFF.

Change the setting of the DIP switch 1-6 to OFF and 7-8 to ON.

Connector