Toshiba e-STUDIO281c, e-STUDIO351c, e-STUDIO451c

e-STUDIO281c/351c/451c TROUBLESHOOTING June 2005 © TOSHIBA TEC

5 - 64

[CC80] Front jogging motor abnormality/Front aligning plate motor abnormality

MJ-1022 (Front jogging motor abnormality)

Is the front jogging plate home position sensor (S6) working properly?

ÈNO ÆReplace the sensor.

YES

Is the wiring between the finisher controller PC board and front jogging motor (M3) correct?

ÈNO ÆCorrect the wiring.

YES

Has the rack run over the stopper of the roll?

ÈYES ÆFix it.

1) Replace the front jogging motor.

2) Replace the finisher controller PC board.

MJ-1023/1024 (Front aligning plate motor abnormality)

Is the front aligning plate home position sensor (PI36) normal?

ÈNO ÆReplace the sensor.

YES

Is the wiring between the finisher controller PC board and the front aligning plate motor (M33)

correct?

ÈNO ÆCorrect the wiring.

YES

Is there any mechanical problem with the path of aligning plate?

ÈNO ÆFix the mechanism.

YES

1) Replace the front aligning plate motor.

2) Replace the finisher controller PC board.