Toshiba e-STUDIO281c, e-STUDIO351c, e-STUDIO451c

e-STUDIO281c/351c/451c ADJUSTMENT June 2005 © TOSHIBA TEC

3 - 50

(2) Adjusting carriages-1 and -2 positions

• Move the carriage-2 toward the exit side.

• Loosen the screws fixing the front side pulley bracket, make the sections A and B of the car-

riage-2 touch with the inside of the exit side frame and screw them up.

Fig.3-16

• Put the carriage-1 on the rail, make the sections C and D of it touch with the inside of the exit

frame and screw up the front/rear side of the bracket to fix it.

Note: Note:

Make sure that the sections A and B of the carriage-2 touch with the exit side frame.

Fig.3-17

Carriage-2 Pulley bracket

Exit side frame

B A

[Rear] [Front]

Enlarged view of carriage

Carriage-1

Exit side frame

Bracket Bracket

[Rear] [Front]

Enlarged view of carriage