Toshiba e-STUDIO281c, e-STUDIO351c, e-STUDIO451c - page 323

June 2005 © TOSHIBA TEC e-STUDIO281c/351c/451c ADJUSTMENT
3 - 83
3
(4) Move the returning roller shaft to its lower
limit (the slack of a belt is lightly taken); then,
tighten the screw on the tension arm plate.
Fig.3-77
(5) Check to make sure that the returning roller
shaft moves smoothly.
Fig.3-78
Screw Tension arm
plate
Returning
roller shaft
Returning
roller shaft