e-STUDIO281c/351c/451c ADJUSTMENT June 2005 © TOSHIBA TEC
3 - 60
Notes:
1. When confirming and adjusting the gap between the developer sleeve and the doctor blade,
insert the gauges into the gap after rotating the developer sleeve so that its marking faces the
doctor blade.
2. While reattaching the color developer unit cover, set the latches securely.
Notes:
1. Insert the gauge “0.50” of the doctor-
sleeve jig into the gap between the devel-
oper sleeve and doctor blade and make
sure that the gauge can move smoothly in
the front/rear direction. In addition, con-
firm that the gauge “0.60” cannot be
inserted into the gap.
Fig.3-35
Developer sleeve
Doctor-sleeve jig
Doctor blade