Toshiba e-STUDIO281c, e-STUDIO351c, e-STUDIO451c - page 363

June 2005 © TOSHIBA TEC e-STUDIO281c/351c/451c PREVENTIVE MAINTENANCE (PM)
4 - 27
4
* m2. Thermistor
Clean the thermistor with alcohol if the toner or dirt is sticking to it when the fuser roller is
replaced. Do not deform or damage the thermistor during the cleaning. Replace the ther-
mistor with a new one if it is damaged or deformed regardless of degree.
* m3. Separation roller
When replacing the transfer belt, apply some White Molykote (HP-300) on both ends of
the separation roller shaft.
Fig.4-25