Toshiba e-STUDIO281c, e-STUDIO351c, e-STUDIO451c State transition diagram of self-diagnosis modes

e-STUDIO281c/351c/451c ERROR CODE AND SELF-DIAGNOSTIC MODE June 2005 © TOSHIBA TEC
2 - 24
• List print mode (9S): The procedure varies depending on the code.
• PM support mode (6S):
• Firmware update mode (89): Refer to “6. FIRMWARE UPDATING”.
Fig.2-1
*1 Turn OFF the power after using the self-diagnosis mode, and leave the equipment to the user.
[9][START]
[POWER] (Code)
101: Adjustment mode (05)
102: Setting mode (08)
(Code)
103: PM support mode
104: Stored information of pixel counter (toner cartridge reference)
105: Stored information of pixel counter (service technician reference)
106: Error history (Maximum 1000 items)
107: Error history (Latest 80 items)
[Digital keys]
Key in the first
code to be printed
[Digital keys]
Key in the last
code to be printed
[POWER]
OFF/ON
(Exit)
[START]
List starts to
be printed
[START] [START]
[6][START]
[POWER] (Code)
2: PM Support Screen
[START]
(Operation started)
[POWER] OFF/ON
(Exit)
Warming up Control panel
check mode Test mode Test print
mode
Adjustment
mode Setting
mode
List print
mode PM support
mode
Firmware
update mode
[POWER]
ON
Normal
Ready
[POWER]
OFF
To user
*1
[0][1] [0][3] [0][4] [0][5] [0][8] [9][START] [6][START] [8][9]
State transition diagram of self-diagnosis modes