Toshiba E-STUDIO555 manual Sheet Insertion, Place the paper for sheet insertion

4 EDITING FUNCTIONS

Sheet Insertion

You can insert a special type of paper such as colored paper at the desired page. This function is called “sheet insertion”. You can insert up to 2 types of sheets for a total of 50 pages. The sheet insertion mode has the following 2 types:

COPIED: Inserts a copied sheet, replacing the specified page.

1
2	REPORT2003
3
4

1

2

3

4

REPORT2003

BLANK: Inserts a blank sheet before the specified page.

1

2

3

1 Place the paper for sheet insertion.

Place it on the bypass tray or in a drawer previously set for insertion sheets. The paper for the insertion sheets must be placed in a different paper source than normal paper.

When the Inserter (optional) is installed in the equipment

For using [BLANK] in the sheet insertion modes, paper for sheet insertion can be set also on the Inserter. You can use [BLANK] in combination with a function for inserting front and back cover sheets with the [INSERTER] function.

P.130 “Inserter”

yWhen placing paper for insertion sheets in a drawer, set the paper type (“INSERT 1” or “INSERT 2”), size and thickness for the drawer.

P.18 “Setting paper type”

yWhen placing paper for insertion sheets on the bypass tray, set the size and thickness.

P.36 “Bypass Copying”

yPlace the paper for insertion sheets of the same size as normal paper in the same direction.

2

3

Place the normal paper in the drawer(s).

Place the original(s).

When placing them on the original glass, they must be placed from the first page.

Sheet Insertion 107