Toshiba E-STUDIO555 „ Setting paper type, Presspanel. the User Functions button on the control

1 BEFORE USING EQUIPMENT

„Setting paper type

When you place any special paper other than plain paper or that not used for normal copying, you need to set the thickness and attribute into this equipment.

yThe thickness and the attribute can be set together; however, one of “THICK 1” to “THICK 3” and the attribute “TAB PAPER” cannot be set together. If one of them is set, the other setting will be cleared.

yWhen the thickness “THICK 1, 2 or 3”, or an attribute other than “NONE” is set for a drawer, the paper placed in this drawer will not be used for the automatic paper selection mode.

yWhen an attribute other than “NONE” is set for a drawer, the Automatic Change of Paper Source function (Feeding the same size of paper from a different drawer even if the specified drawer from which paper is being fed is empty) is disabled for the paper in this drawer.

For how to set Automatic Change of Paper Source, refer to the MFP Management Guide.

yThe set paper type appears on the equipment status indication area with an icon.

P.10 “Equipment status indication area”

Acceptable paper types are as follows:

Thickness

Button			Description		Icon
PLAIN	Plain paper: 64 - 80 g/m2 (17 - 20 lb. Bond)				—
THICK 1 - 3	Thick paper
	THICK 1: 81 - 105 g/m2 (21 - 28 lb. Bond)			,	,
	THICK 2: 106	- 163 g/m2	(29 lb. Bond - 90 lb. Index)
	THICK 3: 164	- 209 g/m2	(91 lb. Index - 110 lb. Index)

Attribute

Button	Description	Icon
NONE	No attribute specified	—
INSERT	Sheets used in the sheet insertion mode
	P.107 “Sheet Insertion”
	Up to 2 types of sheets (Insertion sheets 1 and 2) can be set. To set Insertion sheet 1	,
	and 2, select the drawer for Insertion sheet 1 and press [INSERT], and then select a
	drawer for Insertion sheet 2 and press [INSERT].
COVER	Sheets used in the cover sheet mode
	P.104 “Cover Sheet”
SPECIAL	Colored paper or paper with watermarks, etc.
FAX *1, *2	FAX paper
TAB	Tab paper

*1 Fax transmission and reception is available only when the Fax Unit (optional) is installed.

*2 When lists are printed, paper set as “FAX” is used. For printing lists, refer to the MFP Management Guide.

1 Presspanel. the [USER FUNCTIONS] button on the control

18 Placing Paper