2 HOW TO MAKE COPIES

„Bypass copying on standard size paper

‰Copying on A3, A4, B4 and B5 size paper (in equipment other than for North America) / LD, LT, LG and ST-R size paper (in equipment for North America)

1 Place the original(s).

2 Place paper with its copy side up on the bypass tray. Then align the side guides to the paper length while holding the tab.

When paper is placed, the menu for bypass copying appears.

yThe height of the paper must not exceed the indicator on the side guides.

yWhen you use more than one sheet of paper, fan the sheets well before placing them on the bypass tray. Be careful not to cut your fingers when fanning them.

yDo not push paper into the entrance of the bypass feeder. This could cause a paper jam.

3 Press the button of the same size as that of the paper you placed on the bypass tray.

The paper size is now set.

If the paper size is not selected in this step, copying may be slowed down.

Bypass Copying 37

Page 39
Image 39
Toshiba E-STUDIO555 manual Bypass Copying