Toshiba E-STUDIO555 manual Key in the dimension

2 HOW TO MAKE COPIES

4 Key in the dimension.

1) Press [LENGTH] and key in the value. (100 mm to 297 mm (3.94" to 11.69"))

2) Press [WIDTH] and key in the value. (148 mm to 432 mm (5.83" to 17.01"))

3) Press [OK].

Length and width are indicated as shown on the right:

Width

Length

To call up the dimension data registered previously, press the desired button from [MEMORY 1] to [MEMORY 4], and then press [OK].

To register dimension data into the memory, see the following page:

P.44 “Registering non-standard size in the memory”

5 Selectpanel. other copy modes as required, and then press the [START] button on the control

Bypass Copying 43