Toshiba E-STUDIO555 manual Placing Originals, „ Acceptable originals

2 HOW TO MAKE COPIES

Placing Originals

„Acceptable originals

When the RADF (Reversing Automatic Document Feeder) is used, 2-sided originals can be automatically scanned one sheet after another. When the original glass is used, originals such as OHP films, tracing paper, booklet or 3-dimensional objects, that cannot be placed on the RADF can be scanned, as well as plain paper.

Location	Maximum size	Paper weight	Acceptable sizes for automatic
			size detection
			Other than North America: A3, A4,
Original glass		—	A4-R, A5-R, B4, B5, B5-R
			North America: LD, LG, LT, LT-R,
	Length: 297 mm (11.69")		ST-R
	Width: 432 mm (17.01")	1-sided originals: 35 - 209 g/m2	Other than North America: A3, A4,
RADF		(9.3 - 110 lb.) *1	A4-R, A5-R, B4, B5, B5-R, FOLIO
		2-sided originals: 50 - 157 g/m2	North America: LD, LG, LT, LT-R,
		(13.3 - 41.8 lb.)	ST-R, COMP

*1 You may not obtain enough image quality when an original with a paper weight of more than 157 g/m2 (41.8 lb.) is used.

yAutomatic size detection does not work properly when A/B format originals are used in equipment for North America. It does not work properly when LT format originals are used in equipment other than that for North America.

yAutomatic size detection does not work properly when K format paper is used for printing. (K format is a standard paper size in China.)

yDo not place any heavy objects (4 kg (9 lb.) or over) on the original glass and do not press on it with force.

yBe sure to place ST-size or A5-size originals in a landscape direction when using the RADF.

Maximum number of sheets for one scanning

A maximum of 2000 sheets can be scanned per 1 copy job or up until the embedded memory becomes full. When the number of scanned sheets has exceeded the above limit, this equipment stops scanning and the message below appears.

If you want to print out the data scanned up until then, press [YES]. If you want to delete them, press [NO].

22 Placing Originals