Toshiba G8000 Series No Fault No Warning, Fuse Blown, Another Item, No Alarm No Warning

13.2.2 Fault Display

The Fault Display screen indicates the fault records until they are reset.

		Table 11 - Fault Display Screen
LCD Screen			Description
Indication of no fault
			This screen is displayed if there is no fault recorded,
	FAULTS & WARNINGS
			or after the reset button is pressed.
	NO FAULT
	NO WARNING
Indication if faults recorded
			A fault record is shown with time stamp if
	FAULTS & WARNINGS
			recorded.
	1 FUSE BLOWN
			An arrow shows up with another record that can
	09-09-02 08:05:30
	￿ANOTHER ITEM		be scrolled by pressing the up/down buttons.

*The fault records will remain in the memory until the reset button is pressed for at least 5 seconds, even after the actual cause of the fault has been resolved. Note that the fault records are not deleted when the UPS is turned off.

13.2.3Warning Display

The Warning Display screen indicates the warning records until they are reset.

			Table 12 - Warning Display Screen.
LCD Screen				Description
Indication of no warning
				This screen is displayed if there is no warning
		FAULTS & WARNINGS
				recorded, or after the reset button is pressed.
		NO ALARM
		NO WARNING
Indication if warnings recorded
	FAULTS & WARNINGS			A warning record is shown with time stamp if
		1 UPS OVER LOAD
				recorded.
	09-09-02 08:05:30			An arrow shows up with another record that can
		￿ANOTHER ITEM
				be scrolled by pressing the up/down buttons.

40