Toshiba G8000 Series operation manual Float Charge LED is On Equal Charge LED is Off

(2)Table 18 shows the manual procedure to change from equalize charge to float charge.

After recharging mode is changed to equalize, the mode will automatically be changed back to float charge after a programmed duration has elapsed. So, manual mode change is not usually required.

Table 18 - Changing From Equalize Charge to Float Charge.

Step	Procedure	LCD/LED Status
1	Make sure EQUAL
	CHARGE LED is On.	UPS SUPPLY
		AC-VO	480[V]
		AC- I O	50[%]
	￿	~	~	UPS
	AC INPUT	CONVERTER	INVERTER
		FLOAT CHARGE		AC	￿
	BATTERIES	EQUAL CHARGE		SWITCH
		DISCHARGE			AC OUTPUT
	￿
	BYPASS INPUT			BYPASS
2	Press FLOAT/EQUAL
	button for 0.5 sec.	UPS SUPPLY
	→ Change completed.	AC-VO	480[V]
		AC- I O	50[%]
	￿	~	~	UPS
	AC INPUT	CONVERTER	INVERTER
		FLOAT CHARGE		AC	￿
	BATTERIES	EQUAL CHARGE		SWITCH
		DISCHARGE			AC OUTPUT

￿

BYPASS

BYPASS INPUT

FLOAT CHARGE LED is On; EQUAL CHARGE LED is Off.

49