14. Operation
This section describes the basic procedures to operate the UPS.
CAUTION
Operators should be qualified/trained personnel.
Operation of the UPS by unqualified or untrained personnel may result in electric shock, personal injury or fault.
Make sure you understand the meaning of the warning labels on the equipment, and follow the precautions indicated.
Operating the equipment without understanding of these labels may result in electric shock or burns.
NOTES
Operate the UPS in the specified condition.
Operating the UPS in other conditions may result in fault.
During operation, do not turn off the air conditioner for the UPS room and the battery room.
This will cause the temperature to rise and will result in UPS or battery fault.
When you start or stop the UPS, follow the instruction on the LCD and perform the proper procedures.
14.1 Operation Types
The operation summary is shown below.
No. | Operation | Description | Page No. | |
|
|
|
| |
1 | Startup | Starting up and operating the UPS. | 43 | |
|
|
|
| |
2 | Switch Power Supply | Switching power supply source between UPS and | 45 | |
Bypass. | ||||
|
|
|
| |
3 | Stop | Stop the inverter and chopper/charger. | 46 | |
|
|
|
| |
4 | Complete Shutdown | Turn off the control power supply. | 47 | |
Shutting down the UPS completely. | ||||
|
|
| ||
|
|
|
| |
5 | Float / Equalize | Changing the battery recharge mode between | 48 | |
Charge | float charge and equalize charge. | |||
|
| |||
|
|
|
| |
6 | Protection Charge | Automatic recharge mode transition from | 50 | |
protection charge to float charge. | ||||
|
|
| ||
|
|
|
|
42
