10. PROGRAMMING PROCEDURES
10.5 PLU VERIFYING LABEL
10.5 PLU VERIFYING LABEL
Menu Page: 1
Item No.: 4
PLU data stored in the scale are verified in the following procedure.
g
<MENU>
Page 1
4 |
Set the entire PLU#.
1 | 0 | 0 |
|
|
|
Set the individual PLU#. (Ex. PLU #100)
1 ◇ ◇
Set the block PLU#. (Ex. PLU #100 to 199)
1 | 0 | 0 | NEXT | 1 | 0 | 8 |
PLU |
ENTER |
The verification label is issued.
Set the zone PLU#. (Ex. PLU #100 to 108)
CLEAR |
To interrupt label issue.
ENTER |
To resume label issue which has been interrupted.
PROG.
ESC.
<MENU>
Page 1
Main
<MENU>
g
NOTES:
1.Labels are printed in either batch mode or
2.When no PLU is stored in the selected range, an error occurs when the ENTER key is
| pressed. |
|
|
3. | Pressing the | CLEAR | key releases the scale from the error mode and returns to the initial |
| status of this menu. | ||
4. | After clearing a paper jam error, the scale will wait for an entry of PLU# again. | ||
