10. PROGRAMMING PROCEDURES
10.11 PRINT FORMAT
10.11 PRINT FORMAT
Menu Page: 2
Item No.: 0
The
<MENU>
Page 2
0 |
Select the print format # which allocates the label format #
by the NEXT PLU key or 
key.
Enter the label format #. (Refer to table 2)
CHANGE |
PLU |
|
|
| |
Issue method |
|
| |
Batch | Select “SENSITIVITY ADJUST” | SET | |
| by pressing the | ◇ key. | NEXT |
| When Batch Printing with backing paper is |
| |
| selected, the sensitivity of the label sensor will be |
| |
| set by pressing the | SET NEXT key before |
|
| issuing label. |
|
|
FEED |
j |
|
|
| Is print | Correct |
TEST | position |
|
| correct? |
|
Incorrect
Select the Item for adjustment.
1gradation =0.154 mm (1 dot)
1 gradation
=0.462 mm (3 dots)
1 gradation
=0.462 mm (3 dots)
Only when using the bar code change label with
◇ |
Enter the correct label feed value.
(Range: 0 to 199)
Enter the correct value for commodity name position. (Range: 0 to 9)
Enter the correct value for address position.
(Range: 0 to 15)
Enter the correct value for
(Range: 0 to 65)
ENTER |
ENTER |
ENTER |
ENTER |
j
j
j
j
CHANGE |
PLU |
<MENU> | PROG. | |
Page 2 | ||
| ||
|
|
Main <MENU> ESC.
NOTES:
1.When a commodity name position is adjusted, an address position will move automatically.
2.When entering the other label format #, fine adjust values are initialized.
3.Selecting label format numbers other than those provided in Table 2 results in an error.
4.When selecting a variable length label format, rectangles are printed instead of print items in the case of the test printing.
5.Pressing the ◇ key allows you to select a print format number from 1 to 5.
6. Be sure to press the SET NEXT key when a label format for batch printing with backing paper is selected.
