Toshiba H-9100N Transferring Logo Data, Display Label Receipt Print Logo 320 x 118 dots

10. PROGRAMMING PROCEDURES

10.18 TRANSFERRING LOGO DATA

10.18 TRANSFERRING LOGO DATA

Menu Page: 2

Item No.: 8

Logo data is created on a PC and stored into RAM through the CMT interface. Two different sizes of logos, 320×118 dots and 256×64 dots, are available on the H-9100N series. 64 KB of RAM area is secured for logo data, in which the maximum of 13 logos (320×118 dots) or 26 logos (256×64 dots) can be stored.

Before starting the following operation, set the initial setting #10-7 to 1.

<MENU>

Page 2

			Select a transmission item.
8	Load a tape into		1: SAVE (H-9100N→CMT)
	the CMT Loader		2: VERIFY (H-9100N=CMT)
			3: LOAD (H-9100N←CMT)
	ENTER	PROG.	<MENU>
			Page 2
		ESC.	Main
			<MENU>

NOTE: Two sizes of logos are printed differently as follows:

<Display> <Label> <Receipt>

Print LOGO (320 x 118 dots)

64

256

(Part of LOGO is displayed.)

80

118

1st LOGO

160

2nd LOGO

(Part of LOGO is

printed.)

104

256 64

FSP LOGO (Part of LOGO is overlapped with FSP print area.)

Display LOGO (256 x 64 dots)

: Logo data

: Print/Display area

	1st LOGO	(LOGO #1 & half of LOGO
(LOGO is printed on the		#2 are printed.
center of printing area.)
64	160
	2nd LOGO
	(Part of LOGO is
	printed.)
	FSP LOGO
	(LOGO is printed on
	part of FSP print
	area.)

10-29