Toshiba H-9100N-CA, EO1-32003BE, H-9100N-US owner manual Option, Lon, STLAN-2P, ESD-SR-15, Tmcc

2. SPECIFICATION

					2.2 OPTION
2.2 OPTION
		Option Name	Model No.	Description		Source
			or Part No.
		LON Connector	Part No.	A modular connector used to connect scales		See
		TM8P-88P	EAJ-0028001	to each other in a LON configuration.		Note 2
		LON Terminal	Part No.	A modular resistor attached to the scales		See
		Resistor 285D-8P	EAJ-0029001	connected at both ends of the LON		Note 2
	LON			configuration.
		LON Cable	Part No.	An 8-pin telephone cable used with the LON		See
		S-STLAN-2P	10319100003	connectors attached to both ends of the cable.		Note 2
		(200 m/roll)		This cable connects scales to each other in a
				LON configuration.
		LON Ferrite Core	Part No.	A ferrite core for the LON interface		See
		ESD-SR-15	DDG-0106001			Note 2
	I/O PC Board		OP-9000-IOB	An I/O board equipped with the TMCC		See
				interface and PC-AT keyboard interface ports.		Note 1
				It is used to construct a TMCC system and
				program PLU data, etc..
	TMCC Cable kit		OP-9000-IOCN-	A cable kit for the TMCC interface.		See
			TMCC			Note 1
	Memory Module		OP-9000-SRAM-	DIP type S-RAM to be installed on the MEMO		See
			512KB	PC board for memory expansion. When		Note 1
				expanding the memory, install the two		and 3
				modules as one set.
	10 Base T (LAN) Interface		OP-9000N-LAN	This board enables the H-9100N to be used in		See
	Board (H-9100N only)			a LAN network.		Note 1

NOTES:

1.Contact TOSHIBA TEC H.Q. or your nearest TOSHIBA TEC representative.

2.Order from TOSHIBA TEC Parts Center or purchase locally.

3.When purchasing memory modules locally, select one having the following specifications.

■Maker: HITACHI Static RAM (OP-9000-SRAM-512KB)

■ Type: HM628512ALP-770ns, 600mil 32-pin Plastic DIP (DP-32) (OP-9000-SRAM-512KB)

2- 2