13. OPERATING PROCEDURES
13.9 SELECTING PRINT ITEM
NOTES:
1.A store code can be printed in place of a ‘packed on date’ and ‘sell by date’ by changing the initial settings
To print a store code, select ‘packed on date’ or ‘sell by date’ as a print item using the above procedure
Additionally the print of “packed on time” with alphabetical code can be selected with Initial setting
2.Setting data will not be changed by turning the power off, changing the mode or calling a PLU.
3.The 0 key has no function.
4.Pressing the C key allows you to return to the step of selecting the ‘packed on date’.
5.The range of idle time=0 to 99 seconds. A setting ‘0’ prohibits display of an auto message.
6.Item 29 is operable only when the initial setting
7.Be sure to press the FEED key after the PRT/* key when changing the label format.
13.10 DATE CHANGE
Menu: REG., M.DOWN, or REWRAP
Mode: WEIGH, FIX, or BY COUNT
The date can be changed temporarily.
Press: | DT/TM | |
|
|
|
|
|
|
Enter the new date. (Ex. Dec. 18, 1994)
1
2
1
8
9
4
Month
Day
Year
DATE | 1 2 1 8 9 4 |
PRT |
* |
NOTE: The scale will check the details of the date input. An invalid date will result in an error.
13- 15
