Toshiba H-9100N-CA, EO1-32003BE, H-9100N-US In-Line/Local, Transmission Delay Time Table

10. PROGRAMMING PROCEDURES

10.14 IN-LINE/LOCAL

10.14 IN-LINE/LOCAL

Menu Page: 2

Item No.: 3

When the H-9100N is used as a satellite in an in-line system, the “ID #” and “Transmission delay time” can be set by the following procedure.

<MENU>

Page 2

3

◇

Select mode

TMCC	Set ID numbers
	(Range: 0 to 255)

lOFF-line

ENTER

The transmission delay time can be set when in- line system is selected for TMCC.

(Refer to Table 5)

l

ENTER

PROG.

ESC.

<MENU>

Page 2

Main

<MENU>

NOTES:

1.The TMCC baud rate is fixed to 4800 BPS.

2.After setting the ID #, turn the power switch OFF and ON again.

3.This setting is not available when the Initial set #13-6 is set to 1 (LAN: allowed).

■Table 5: Transmission Delay Time Table

	TR-Time	(ms)		TR-Time (ms)
1	20 to	39	6	120 to 139
2	40 to	59	7	140 to 159
3	60 to	79	8	160 to 179
4	80 to	99	9	180 to 199
5	100 to	119

The default is 3.

10-23