Digital Features
Tone/Pulse Dialing
Tone/Pulse Dialing
With some older COs, calls are made on CO lines that are programmed for rotary dial pulses. This feature enables you, while on these lines, to switch to tone dial in order to access remote equipment (such as an answering machine) requiring DTMF tones.
With ISDN calls, when you press 7RQH#'LDO#6HOHFW ()&1 + [B]), all of the digits entered after that point are sent with DTMF tones.
➤To change Tone Dialing
1.Access a CO line.
2.Dial a telephone number.
3.While on the call, press 7RQH#'LDO# 6HOHFW#+)&1 + [B]).
Although the CO line is programmed for rotary dial pulses, access the CO line and dial the telephone number like any other call described in this user guide.
You can send DTMF tones with your dial pad. The feature is cancelled when the call is completed.
Two CO Line Connection (Tandem)
➤To connect two outside lines (using a [DN] button)
1.While talking on an outside call using a
[DN] button, press
)&1 + 5.
2.Dial a CO line access code and then the outside telephone number.
You hear dial tone and the call is put on hold.
If you receive a busy tone or no answer, press [DN] to return to the original connection.
See Table 9 on Page
66 | Strata AirLink Integrated Wireless Handset 5/99 |
