Standard Features
Override Calls
➤To set a MW indication at another telephone
iIf the called telephone is busy or
does not answer, press : + (1'.
The MW lamp turns on.
➤To cancel the MW indication at another telephone
iPress &$// + the
called telephone number + :: + (1'.
Your hear busy tone if the called telephone is busy. If the telephone is idle, you hear repetitive ringing or a single tone.
Override Calls
Note The stations indicated in the LCDs shown below and on the following pages (203, 204, 205, and 210) are examples, not handset defaults.
The available override features are:
€Busy Override – sends muted ring tones to a busy station to indicate that a call is waiting. The muted ring is programmed for each station as two muted rings only or continued muted rings until the call is answered. The muted ring can be sent to the telephone speaker or to the telephone handset/headset and speaker.
€DND Override – sends a tone to an idle or busy station in the DND mode to indicate that a call is coming in. Your handset can also be programmed to block DND Override from other telephones. The handset LCD shows that the called station, 210, is in the DND mode.
N | O | . | 2 | 0 | 4 | I | N | T |
2 | 1 | 0 |
| D | N | D |
|
|
|
|
|
|
|
| |||
|
|
|
| 1 | 2 | : | 1 | 5 |
€Executive Override – enters an established conversation. Your handset can also be programmed to block Executive Override. The Privacy on Line feature does not block this feature.
98 | Strata AirLink Integrated Wireless Handset 5/99 |
