Toshiba Integrated Wireless Handset manual To change a remote forwarding destination number

Digital Features

Call Forward (CF)

➤To change a remote forwarding destination number

If Call Forward-External mode is set at your station, you can change the forwarding destination from a telephone outside of the system.

1.Call into the Strata DK system over a CO line programmed for DISA.

2.After you get dial tone, press &9:3 + your [PDN].

3.Enter the Remote CF–External security code.

4.Enter the new destination.

5.Press & + (1'.

You hear ringback tone signal, then internal dial tone for 10 seconds. Try again if you hear busy tone.

Note See the System Administrator for DISA telephone numbers.

You hear a confirmation tone.

If a number is not dialed, the system automatically makes the DISA CO line ring as a normal incoming call. Then, if the call is not answered within 15 seconds after the ringing starts, it disconnects.

You hear a confirmation tone. See the System Administrator for the security code that is assigned to your handset in system programming.

Notes

♦You can enter an internal number, Voice Mail number, or a CO line access code + an external telephone number.

♦With some systems, you can dial a line group code instead of a CO line number access code. (See “CO Line Access Codes” on Page 109 for access code information.)

You hear a confirmation tone.

Strata AirLink Integrated Wireless Handset 5/99 45