Toshiba Integrated Wireless Handset manual Press &$// + &93 +

Standard Features

Call Forward

Call Forward–External

1.Store the destination number at Station SD location code 49.

2.Press &$// + &9:3.

Notes

♦Only perform Step 1 the first time CF-External is set or when you change the destination. It is not necessary to store the destination each time; it remains in system memory.

♦The LCR access code “9” cannot be used.

Incoming calls forward to the destination stored at Station Speed Dial Location 49.

➤To cancel a CF–External

i Press &$// + &9:3 + (1'.

➤To change a remote forwarding destination number

If Call Forward-External mode is set at your station, you can change the forwarding destination from a telephone outside of the system.

1.Call into the Strata DK system over a CO line programmed for DISA.

2.After you get dial tone, press &9:3 + your [PDN].

3.Enter the Remote CF–External security code.

You hear ringback tone signal, then internal dial tone for 10 seconds. Try again if you hear busy tone.

Note See the System Administrator for DISA telephone numbers.

You hear a confirmation tone.

If a number is not dialed, the system automatically makes the DISA CO line ring as a normal incoming call. Then, if the call is not answered within 15 seconds after the ringing starts, it disconnects.

You hear a confirmation tone. See the System Administrator for the security code that is assigned to your handset in system programming.

Strata AirLink Integrated Wireless Handset 5/99 85