4.9 Memory module 4 Replacement Procedures
Satellite R20/TECRA M7 Maintenance Manual (960-572) [CONFIDENTIAL] 4-25
Installing the memory module
To install the memory module(s), make sure the computer is in boot mode and powered off.
Then perform the following procedure. (See Figure 4-13 and 4-14.)
1. Insert the memory module(s) into the connector slantwise (the terminal side first)
and press it to connect firmly.
CAUTION: The power must be turned off when you insert the memory module. Inserting
the memory module with the power on risks damaging the module or the
computer itself.
Use the slot A prior to the slot B. Do not install a memory module only in
the slot B. Otherwise, the computer or the memory may be damaged.
Never press hard or bend the memory module.
After installing the memory module, confirm that the memory module is fixed
with the left and right latches.
2. Install the memory slot cover and secure it with the following screws.
• M2.5×3S S-THIN HEAD screw ×2