4.27 Fingerprint sensor board 4 Replacement Procedures
4.27 Fingerprint sensor board
Removing the Fingerprint sensor board
The following describes the procedure for removing the fingerprint sensor board.
(See Figure 4-44.)
1. Remove the following screw and fingerprint sensor board.
M2.5×6B FLAT HEAD screw ×1
2. Disconnect the fingerprint sensor cable from the connector CN9560 on the
fingerprint sensor board.
M2.5x6B FLAT HEAD
Fingerprint sensor board
Fingerprint
sensor cable
CN9560
Figure 4-44 Removing the fingerprint sensor board
Installing the Fingerprint sensor board
The following describes the procedure for installing the fingerprint sensor board.
(See Figure 4-44.)
1. Connect the fingerprint sensor cable to the connector CN9560 on the fingerprint
sensor board.
2. Install the fingerprint sensor board and secure it with the following screw.
M2.5×6B FLAT HEAD screw ×1
Satellite R20/TECRA M7 Maintenance Manual (960-572) [CONFIDENTIAL] 4-65