4 Replacement Procedures 4.12 Cover assembly and Base assembly
Installing the Cover assembly and Base assembly
The following describes the procedure for installing the cover assembly and base assembly.
(See Figure 4-18 to 4-20.)
1. Install the base assembly to the cover assembly.
2. Secure the cover assembly with the following screws.
M2.5×16B FLAT HEAD screw ×3
M2.5×6B FLAT HEAD screw ×9
CAUTION: Securing the screws in the order shown in the following figure.
2
31
9
4
12 8
5
6
10
7
11
3. Turn over the computer and open the display.
4. Secure the cover assembly with the following screw.
M2.5×8B FLAT HEAD screw ×1
5. Turn the display 90 degrees counter clockwise.
6. Secure the cover assembly with the following screws.
M2.5×6B FLAT HEAD screw ×2
7. Install the hinge rear cover.
4-34 [CONFIDENTIAL] Satellite R20/TECRA M7 Maintenance Manual (960-572)