Toshiba M7 - page 323

4.32 Hinge assembly 4 Replacement Procedures
4. Remove the following screws and hinge assembly by lifting it up.
• M2.5×6S S-THIN HEAD screw ×2
M2.5×6S S-THIN HEAD
Hinge assembly
Figure 4-53 Removing the hinge assembly (3)
Installing the Hinge assembly
The following describes the procedure for installing the hinge assembly. (See Figure 4-51 to
4-53.)
1. Seat the hinge assembly in place and secure it with the following screws.
• M2.5×6S S-THIN HEAD screw ×2
2. Turn the display rear cover 90 degrees clockwise.
3. Install the display rear cover to the cover assembly and secure it with the following
screws.
• M3×4S FLAT HEAD screw ×2
4. Turn the display rear cover 90 degrees counter clockwise.
5. Arrange the wireless LAN antenna cable and Bluetooth antenna cable in place and
stick the insulator and acetate tape.
Satellite R20/TECRA M7 Maintenance Manual (960-572) [CONFIDENTIAL] 4-81