4 Replacement Procedures 4.29 LCD unit/FL inverter
3. Remove the following screw securing the LCD unit.
M2.5×6B FLAT HEAD screw ×1
4. Carefully lift up the top of the LCD unit.
NOTE: When lifting up the top of the LCD unit, hold the corners of the LCD unit. The top
edge of LCD unit is sensitive area.
5. Peeling off two glass tapes and disconnect the LCD cable and digitizer cable from
the connectors on the back of the LCD unit.
CAUTION: When removing the cables, be careful not to damage the connectors.
6. Remove the LCD unit from the display cover.
Glass tape
LCD cable
Digitizer cable
M2.5x6B FLAT HEAD
Figure 4-47 Removing the LCD unit
4-68 [CONFIDENTIAL] Satellite R20/TECRA M7 Maintenance Manual (960-572)