Toshiba M7 4.17 Microphone/Front panel

4.17 Microphone/Front panel 4 Replacement Procedures
4.17 Microphone/Front panel
Removing the Microphone/Front panel
The following describes the procedure for removing the microphone/front panel. (See Figure
4-25 and 4-26.)
1. Disconnect the microphone cable from the connector CN6050 on the system board.
2. Lift the system board a little and remove the front panel (with the microphone) from
the cover assembly.
CN6050
Microphone cable
Front panel
Figure 4-25 Removing the front panel
Satellite R20/TECRA M7 Maintenance Manual (960-572) [CONFIDENTIAL] 4-41