4 Replacement Procedures 4.25 Touch pad
3. Remove the touch pad from the slot.
4. Disconnect the touch pad cable from the connector on the touch pad.
Touch pad cable
Touch
p
ad
Figure 4-42 Removing the touch pad
Installing the Touch pad
The following describes the procedure for installing the touch pad. (See Figure 4-41 to 4-42.)
1. Connect the touch pad cable to the connector on the touch pad.
2. Install the touch pad to the slot.
3. Install the touch pad cover while engaging latches and secure it with following
screw.
M2.5×6B FLAT HEAD screw ×1
4-60 [CONFIDENTIAL] Satellite R20/TECRA M7 Maintenance Manual (960-572)