Toshiba M7 4.28 Switch board

4 Replacement Procedures 4.28 Switch board
4.28 Switch board
Removing the Switch board
The following describes the procedure for removing the switch board. (See Figure 4-45.)
1. Remove the following screw securing the switch board and pull up the switch board.
• M2.5×6B FLAT HEAD screw ×1
2. Disconnect the switch cable from the connector CN9550 on the back of the switch
board.
M2.5x6B FLAT HEAD
Switch cable
(Connected to CN9550)
Switch board
Figure 4-45 Removing the switch board
Installing the Switch board
The following describes the procedure for installing the switch board. (See Figure 4-45.)
1. Connect the switch cable to the connector CN9550 on the switch board.
2. Install the switch board and secure it with the following screw.
• M2.5×6B FLAT HEAD screw ×1
4-66 [CONFIDENTIAL] Satellite R20/TECRA M7 Maintenance Manual (960-572)