4 Replacement Procedures 4.11 Optical disk drive
4.11 Optical disk drive
Removing the optical disk drive
The following describes the procedure for removing the optical disk drive. (See Figure 4-16
and 4-17.)
1. Remove the following screw.
M2.5×8B FLAT HEAD screw ×1
2. Turn over the computer and remove the following screw.
M2.5×6B FLAT HEAD screw ×1
3. Turn the computer face up. While pushing the latch toward the arrow in the Figure 4-
16, pull out the optical disk drive from the slot.
Optical disk drive
(Inside of the slot)
M2.5×6B FLAT HEAD
M2.5×8B FLAT HEAD
Latch
Figure 4-16 Removing the optical disk drive
4-28 [CONFIDENTIAL] Satellite R20/TECRA M7 Maintenance Manual (960-572)