4 Replacement Procedures 4.23 Sensor board
4.23 Sensor board Removing the Sensor board
The following describes the procedure for removing the sensor board. (See Figure 4-39.)
1. Remove the sensor board from the slot.
2. Disconnect the sensor cable from the connector CN9510 on the sensor board.
Sensor board
Sensor cable
CN9510
Figure 4-39 Removing the sensor board
Installing the Sensor board
The following describes the procedure for installing the sensor board. (See Figure 4-39.)
1. Connect the sensor cable to the connector CN9510 on the sensor board.
2. Install the sensor board to the slot.
4-56 [CONFIDENTIAL] Satellite R20/TECRA M7 Maintenance Manual (960-572)