Toshiba M7 - page 272

4 Replacement Procedures 4.11 Optical disk drive
4-30 [CONFIDENTIAL] Satellite R20/TECRA M7 Maintenance Manual (960-572)
Installing the optical disk drive
The following describes the procedure for installing the optical drive. (See Figure 4-16 and 4-
17.)
1. Install the mounting plate to the optical disk drive assembly and secure it with the
following screw.
• M2×3S S-THIN HEAD screw ×1
2. Install the pushing plate and connector to the optical disk drive assembly and secure
it with the following screws.
• Stud screw ×2
3. Insert the optical disk drive into slot to connect it to the connector on the system
board. Press to ensure a firm connection.
4. Secure the optical disk drive with the following screw.
• M2.5×8B FLAT HEAD screw ×1
5. Turn over the computer and secure the optical disk drive with the following screw.
• M2.5×6B FLAT HEAD screw ×1