Toshiba M7 - page 280

4 Replacement Procedures 4.15 Bluetooth module
4-38 [CONFIDENTIAL] Satellite R20/TECRA M7 Maintenance Manual (960-572)
Installing the Bluetooth module
To install the Bluetooth module, follow the steps below. (See Figure 4-23.)
1. Connect the Bluetooth cable to the connector on the Bluetooth module.
2. Connect the Bluetooth cable to the connector CN4400 on the system board and set
the Bluetooth module to the slot in place.
3. Connect the Bluetooth antenna cable to the connector on the Bluetooth module.
4. Stick the glass tape in place.