Toshiba EO1-11115, MA-186-100 SERIES owner manual Replenishing Ink to the Store Name Stamp

EO1-11115

MA-186-100 SERIES

Replenishing Ink to the Store Name Stamp

X

REG

OFF Z

SET

Ink Bottle

Rear-side Pad of Store Name Stamp

1

Turn the Control Lock to the OFF position using the Control Key.

2

To remove the Printer Cover, insert the Printer Cover Key to the Printer Cover Lock, and then turn it 90° clockwise.

3

Remove the Stamp from the Stamp Print Unit by pulling out toward the rear of the register with your fingers on the notches of both sides as shown in the figure.

4

Apply ink to the pad on the rear side of the stamp. The amount of the refilling should be adjusted according to the density of the printed message, but the limit of 2 cc should not be exceeded. (The ink bottle supplied contains 5 cc of ink.)

NOTES: 1. Replenish the ink drop by drop sev- eral times until the pad does not ab- sorb any more.

2.Allow time for ink to saturate the stamp.

- 95 -