Toshiba MA-186-100 SERIES, EO1-11115 owner manual Sales Memory Clear, OperationX, 05.- 28.- 9 00.1

EO1-11115

MA-186-100 SERIES

Sales Memory Clear

The operation defined as “Sales Memory Clear” will only clear the sales data accumlated in the register’s memory (report memory). The programmed data will not be cleared. By operating a Sales Memory Clear

,all the sales data including non-resettable totals and counters, Reset Report Counts, Receipt Consecutive No., and Electronic Journal memory are cleared.

Warning: This clear operation deletes all sales data stored in the register’s memory.

Operating Procedure

Condition: Any time, outside or during any operation sequence except during Key Setting or Key Location Changing or System Option Setting procedure.

Operation:X

Use the S Key to turn the	REG
Control Lock to “BLIND”.	OFF		Z
	SET	(BLIND)

Depress the following Numeric Key according to the display and print format for zero amount:

Numeric Key			Zero-amount
			Format
	1		.	0
					for use in US or Canada
		3		0 . 0 0

Depress the AT/TL key.

A Sales Memory Clear receipt is issued.

Sales Memory Clear Symbol Line (03 for Numeric 3, 01 for Numeric 1)

Receipt Consecutive No. is reset to 0001.

(Date and Time remain unreset.)

Thank you

Call again

05.- 28.- 9 7

0 3 ★0.0 0

000.1

13 - 0 4

Zero-amount Display & Print Format designated here.

NOTE: When a Sales Memory Clear is operated, the condition “after all sales data reset” is obtained, just as “Status Clear” or “All Memory Clear”. Therefore, no Reset Reports need to be taken for starting any programming operation.

- 105 -