Toshiba EO1-11115, MA-186 Status Clear and Memory Clear Operations, Operating Procedure, 27.1

EO1-11115

MA-186-100 SERIES

23. Status Clear and Memory Clear Operations

The operations described in this chapter are provided for initial start-up of the machine or emergency but not to be operated as part of daily routines. Do not perform any of these operations unless it is really necessary.

Status Clear

The operation defined as “Status Clear” will only clear an error or key-locked condition that disables normal operations (though it seldom happens). Thus neither the sales data nor the programmed data will be cleared by a Status Clear (except that when a Status Clear is operated to clear a key-locked condition during a sale, the sale item data already entered for the current sale will be cleared).

The Status Clear also has the function to obtain the condition “after all sales data resets” (as if all sales data had been reset) but will not actually affect any sales data. Such a condition is required in some programming operations and is usually obtained by taking the required reset reports. However, when you do not want the sales data to be reset because it is still in the business hours,etc., this function of the Status Clear will be effective. But be careful in using the function; depending on the programming item, sales data resets may really be necessary instead of a Status Clear, to keep consistency between the programmed data and the sales data.

Operating Procedure

Condition: Any time, outside or during any operation sequence

Operation: Remove the plug of the register’s power cord from the wall outlet (to turn OFF the power).

X

REG

Use the S Key to turn the Control	OFF		Z
Lock to “BLIND”.
	SET	(BLIND)
					Thank you
Plug in the cord (to turn ON the power).					Call again
A Status Clear receipt is issued.				05.- 28.- 9 7
	Status Clear Symbol Line			0 0	★0.0 0
	Date, Consecutive	No.,	and	0 27.1
	Time are not reset.			1 3 - 0 4

Zero-amount Display & Print Format may vary depending on the designa- tion in the last “Sales Memory Clear” or “All Memory Clear” (refer to the following pages.) Initial Format: 0.00

- 104 -