Toshiba EO1-11115, MA-186-100 SERIES owner manual Key Installation Setting, REG OFF AT/TL SET Blind

EO1-11115

MA-186-100 SERIES

Key Installation Setting

Condition: After all Daily and Periodical Resets; refer to “NOTE on Condition” on page 15.

Setting Procedure:

Use the S Key to turn the Control Lock to the “BLIND” position.

X

REG
OFF	Z	→	7	6	→	AT/TL

SET (BLIND)

To declare Key Installation Setting.

(The BLIND position is the	←
unmarked step next to “Z”.)	Repeat for all the
	keys to be newly
	installed, for lo-
	cation changes,
	or for reading
	Key Codes
	already set.

Only to read the Key Code currently set on the key.

→			←	→		AT/TL
		→
		.
Key Code (max. 3 digits;		.		Depress the key to be set
		.			Depress the [AT/
see the List of Keys on the				with the Key Code.
		.			TL] key to com-
preceding page.)				Displays the Key Code
	Displays the en-				plete the Key In-
				set or read , in the
	tered Key Code				stallation Setting
				AMOUNT portion.
	in the AMOUNT				operation.
	portion , as it is
	entered.

Blank Keyboard Sketch (for your planning aid)

Fill in:					( )	(	)	(	)	(	)	(	)	(	)	(	)	(	)
Key Name
	(	)	(	)	(	)		(	)	(	)	(	)	(	)	(	)	(	)
→
Key Code
	(	)	(	)	7		8			(	)	(	)	(	)	(	)	(	)
→									9
(Refer to the “List
	(	)	(	)	4		5		6	(	)	(	)	(	)	(	)	(	)
of Keys” on the pre-
ceding page.)
	(	)	(	)	1		2		3	(	)	(	)	(	)	(	)	(	)
For the Standard
	(	)	(	)	0	(	)	(	)	(	)	(	)	(	)		AT/TL
Keyboard Layout,
refer to Chapter “7.
Keyboard” on page
9.

- 23 -