Toshiba PSLD2X, PSLD1X, PSLD3X manual General Replacement Procedures, Hdd

4.1 General 4 Replacement Procedures

4.1General

This chapter explains how to disassemble the computer and replace Field Replaceable Units (FRUs). Some replacement procedures may not require you to remove all the surrounding FRUs to replace only one FRU. The chart below shows the FRUs in the order in which they should be removed in a top-down manner, irrespective of their physical locations. The FRUs shown in the top area of the chart should normally be removed before removing the FRUs shown in the bottom area. To replace the FRUs, first identify the suspect FRU for the system failure. Next, according to this chart, determine the FRUs that need to be removed before removing the suspect FRU. After you determine those FRUs, go to the appropriate sections according to the section numbers shown in the boxes. Then start removal and replacement.

	4. 2		4. 4		4. 5		4. 6
	HDD		Keyboard		MDC Module		Wireless LAN Card
4. 3					4. 8
	ODD Bay Module				Display Assembly
4.7
	Top Cover
4. 17		4.18		4. 9
	Speakers	Power Button Board		System Board, AC-IN cable and ODD Extended Board
		and Switch Board
4. 19		4.20		4. 12		4. 10		4. 11
	Touch Pad and
		USB Cable, CRT Cable,		Broadcom Card		Cooling Module		CPU
	Touch Pad Board
		and RJ11 cable				and Fan

4. 13

Display Mask

4. 14

FL Inverter Board

4. 15

CCD Board and MIC

4. 16

LCD Modules

How to use the chart (two examples):

•For removing the System Board:

First, remove the top cover with the display assembly. Then, remove the HDD, selectable bay module, Bluetooth card, keyboard, and wireless LAN card, all of which are shown above the top cover with the display assembly.

•For removing the LCD Module: First, remove the display mask and FL inverter board, both of which are shown above the LCD module.

	4. 2		4. 4		4. 5		4. 6
	HDD		Keyboard		MDC Module		Wireless LAN Card
4. 3					4. 8
	ODD Bay Module				Display Assembly
4.7
	Top Cover
4. 17		4.18		4. 9
	Speakers	Power Button Board		System Board, AC-IN cable and ODD Extended Board
		and Switch Board
4. 19		4.20		4. 12		4. 10		4. 11
	Touch Pad and
		USB Cable, CRT Cable,		Broadcom Card		Cooling Module		CPU
	Touch Pad Board
		and RJ11 cable				and Fan

4. 13

Display Mask

4. 14

FL Inverter Board

4. 15

CCD Board and MIC

4. 16

LCD Modules

System Board

LCD Module

Satellite L350/ Satellite Pro L350/ EQUIUM L350/ SATEGO L350 Maintenance Manual 4-1