Toshiba PSLD3X, PSLD1X, PSLD2X manual System Board, AC-IN Cable and ODD Extended Board, CN3 CN4

4 Replacement Procedures 4.9 System Board, AC-IN Cable and ODD Extended Board

4.9 System Board, AC-IN Cable and ODD Extended Board

Removing the System Board, AC-IN Cable and ODD Extended Board

NOTE: Be careful of the eject button for the PC card. It can be damaged when removing the board. Make sure it is securely installed.

Remove the System Board, AC-IN cable and ODD extended board according to the following procedures and Figure 4-16.

1.Remove CRT cable from CN4 on the system board.

2.Remove the USB cable from CN14 on the system board.

3.Remove the AC-IN cable from CN3.

4.Remove one M2.5x4 black flat head screw on the system board.

5.Remove one M2.5x4 black flat head screw on the fan.

6.Remove two M2.5x4 back flat head screws on the ODD extended board.

7.Remove the system board and ODD extended board

8.Remove the ODD extended board from system board.

9.Remove the AC-IN cable on the bottom cover.

AC-IN cable

M2.5x4 black flat head screw CRT cable

CN3

CN4

System board

CN14 USB cable M2.5x4 black

flat head screw

ODD extended board

Figure 4-16 Removing the system board

4-32 Satellite L350/ Satellite Pro L350/ EQUIUM L350/ SATEGO L350 Maintenance Manual